Clamp Meter

Autoranging Digital Clampmeters - 400A AC
Model : 27-AUTO

400A ACAuto Ranging, 31/2 Digit, 2,000 Counts,Data Hold,Max, NCV, APO

RangesAC Current 2A, 20A, 200A, 400A (Auto Ranging)Accuracy +-(3%rdg+5dgt) on 2A+-(2%rdg+3dgt) on 20A+-(2%rdg+5dgt) on 200A & 400AOverload 400A AC max. for 1min.AC Voltage 2V,20V,200V, 600V (Auto Ranging)Accuracy +-(1.2%rdg+3dgt)DC Voltage 200mV, 2V, 20V, 200V, 600V(Auto Ranging)Accuracy +-(0.8%rdg+3dgt)Resistance 200V, 2kV, 20KV, 200kV,2MV, 20MV(Auto Ranging)

Autoranging Digital Clampmeters - 1000A AC
Model : 2502T-Auto

1000A ACAuto /Manual, 31/2 Digit, 2,000 Counts,Temperature, Data Hold, Max, NCV, APO

AC Current 2A, 20A, 200A, 1000A
Accuracy +-(3%rdg+5dgt) on 2A & 20A+-(2%rdg+5dgt) on 200A & 1000A
Overload 1000A AC max. for 1min.
AC Voltage 2V,20V,200V, 750VAccuracy +-(1.2%rdg+3dgt)
DC Voltage 200mV, 2V, 20V, 200V, 1000V
Accuracy +-(0.8%rdg+3dgt)
Temperature -200C to 7500CAccuracy +-(3%rdg+5dgt)

Autoranging Digital Clampmeters - 600A DC / AC
Model No. 36 Auto

600A DC / AC Auto Ranging, 33/4 Digit, 4,000 Counts, Temperature, Capcitance, Data Hold, Hz/Duty,NCV, APO

AC Current 40A, 400A/600A
DC Current 40A, 400A/600A
Accuracy +-(3%rdg+3dgt)
Accuracy +-(2.5%rdg+8dgt) on 40A+-(2.5%rdg+5dgt) on 400A/600A
Overload 600A AC max. for 1min.

Autoranging Digital Clampmeters - 400A AC

400A ACAuto Ranging, 33/4 Digit, 4,000 Counts,Data Hold, Rel Test, NCV, APO

AC Current 40A, 400A (Auto Ranging)
Accuracy +-(2.5%rdg+5dgt)
Overload 400A AC max. for 1min.AC Voltage 4V,40V,400V, 600V (Auto Ranging)
Accuracy +-(1.2%rdg+3dgt)
DC Voltage 400mV, 4V, 40V, 400V, 600V(Auto Ranging)
Accuracy +-(0.8%rdg+3dgt)
Frequency 10Hz, 100Hz, 1000Hz,10KHz, 100KHz, 1000KHz,10MHz (Auto Ranging)
Accuracy +-(0.5%rdg+2dgt)

1000A AC/DC TRMS Digital Clampmeter With VFD, EF-Detection
MODEL KM 088

SPECIAL FEATURES
* AmpTipTM low-current range calibrated at Jaw-tip for slim-conditions
* MAX/MIN/AVG Recording mode (Auto ranging)
* VFD-V & Hz for fundamental V/Hz of most Variable-Frequency-Drives
* Display Hold & Non-Contact EF-Detection (NCV)
* Back-lighted easy-to-read LCD display
* Flashlight for easy operation in dim areas
* Fast 80ms Peak-RMS mode to capture in-rush currents
* Relative mode with DC-Zero mode & 5ms Crest (Instantaneous Peak-Hold) mode

GENERAL SPECIFICATIONS
* Sensing AC; True RMS
* Jaws Opening size & conductor diameter 51mm Max.
* Display 3-5/6 digits 6000 counts
* Update Rate 5 per second nominal* Polarity Automatic
* Operating Temperature -10C to 50C
* Altitude Operating below 2000m; Storage below 12000m
* Storage Temperature -20 DegreeC ~ 60 DegreeC, <80% R.H. (with battery removed)
* Temperature Coefficient Nominal 0.10 x (specified accuracy) /
oC @ (-10oC -- 18oC or 28oC -- 50oC), or otherwise Specified
* Power Supply Standard 1.5V AA Battery x 2
* Power Consumption typical 13mA for Current Functions
* Low Battery Below approx. 2.85V for Capacitance & Hz Below approx. 2.5V for other functions
* APO timing Idle for 32 minutes
* APO Consumption typical 5mA
* Dimension 258(L) x 94(W) x 44(H)mm
* Weight approx 392 gms.

ACCESSORIES
Test leads set, Users Manual, Soft carrying pouch.

1000A DC/AC DIGITAL CLAMP METER 9 FUNCTIONS 32 RANGES
Model 2781 / 2781-T(True RMS)

FEATURES :
* Overload protection on all ranges.
* Maximum Voltage between anyterminal and earth ground 600V rms
* Dual slope integration
* Data-hold facility
* DCA zero button for accurate reading
* Low battery indication? Auto power off

GENERAL SPECIFICATIONS :
* Sensing : Average sensing (Model 2781)True RMS sensing (Model 2781-T)
* Jaw opening size : 40mm
* Display : 3 3/4 digit 3999 counts liquidcrystal LCD display.
* Over range indication : Display of "OL"on LCD at the highest position
meansrange selection too low for the input.(Except for ranges of 1000A AC, &600V AC / DC)
* Polarity : Symbol "-" automatic displayedfor negative input.
* Sampling rate : 3 times per second (Digital display)
* Auto power off : The meter is automatically powered off after idlingfor 15 minutes.
To awake the meter, turn the rotary function switchor push any button.
* Operating Temperature & Humidity : 0 DegreeC to 40 DegreeC; < 80% R.H.Non-condensingi
Low battery : The symbol Battery low is displayed when the batteries areweak
and below the operating Voltage. Replace batteries immidiately.
* Battery life : Approx. 60 hrs continuously use with alkaline batteries.
* Power supply : 1.5V AAA x 2
* Dimension : 228(L) x 76(W) x 39(H) mmi Weight : approx. 465gms. (Including batteries)

ACCESSORIES :
Test leads (pair), Battery installed, User's manual, K-Type Thermocouople(model 2781-T) & Carrying case.

Auto / Manual Ranging Digital Clampmeters - 600A AC
Model No. : 2727

600A AC (TRMS)33/4 Digit, 4,000 Counts, Frequency,Data Hold, Temperature

AC Current 40A, 400A, 600AAccuracy +-(1.5%rdg+4dgt) on allranges (50-60Hz)+-(3.5%rdg+5dgt) on allranges (40-500 Hz)Overload 600A AC max. for 1min.AC Voltage 400V, 750V (50-500 Hz)Accuracy +-(2.9%rdg+4dgt) on all rangesDC Voltage 1000VAccuracy +-(1.5%rdg+1dgt)

Digital DC / AC WATT Power Clamp Meter11 Functions 21 Ranges

Model - 2760

? Installation Categories III ? Indoor use only ? Altitude up to 2000 meters? Data Hold ? Auto Power off

Auto / Manual Ranging Digital Clampmeters -1000A AC TRMS

Model 1008-TRMS

TRMS, Auto / Manual, 3 5/6 Digit, 6,000Count LCD with Backlight, APO,Capacitance, Frequency, Duty Cycle &Temperature Ranges

DC Voltage 600mV/6/60/600/1000VAccuracy +- (0.5%rdg + 3dgt)AC Voltage 600mV/6/60/600/750VAccuracy +- (0.8% rdg + 5dgt)AC Response 40Hz ~ 1000HzDC Current 600/6000AAccuracny +- (0.8% rdg + 10dgt)AC Current 600/6000A / 600 / 1000AAccuracy +- (2.0% rdg + 30dgt)AC Response 40 Hz ~ 1000HzOverload 1000A AC Max. for 1min.for AResistance 600V/6/60/600kV/6/60MV

Digital Clampmeters - 1200A DC / AC TRMS

Model : 1080 TRMS

TRMS, Auto / Manual, 3 5/6 Digit, 6,000Count LCD with Backlight, APO,Capacitance, Frequency, Duty Cycle &Temperature Ranges

600A AC True RMS Digital Clamp Meter With VFD, EF-Detection, AMPTIP Function For Low Current Measurement & 3 Phase Rotation Check Function &3 Phase Sequence Indication
MODEL KM 076

SPECIAL FEATURES
* AmpTipTM low-current range calibrated at Jaw-tip for slim-conditions for accurate readings
* MAX/MIN/AVG Recording mode (Auto ranging)
* VFD-V & Hz for fundamental V/Hz of most Variable-Frequency-Drives
* Display Hold & Non-Contact EF-Detection (NCV)
* Back-lighted easy-to-read LCD display
* Fast 80ms Peak-RMS mode to capture in-rush currents
* Relative mode with DC-Zero mode & 5ms Crest (Instantaneous Peak-Hold) mode
* 3-Phase Rotation-R for MAINS supply (Probe contact)
* 3-Phase Rotation-M (Hi-sensitivity mode) for Motors (Probe-contact)

GENERAL SPECIFICATIONS
* Sensing AC;True RMS
* Jaws Opening size & conductor diameter 30mm Max.
* Display 3-5/6 digits 6000 counts
* Update Rate 5 per second nominal
* Polarity Automatic
* Operating Temperature 0C to 40C
* Relative Humidity Maximum relative humidity 80% for temperature up to
31C decreasing linearly to 50% relative humidity at 40C
* Altitude Operating below 2000m
* Storage Temperature -20 DegreeC ~ 60 DegreeC, <80% R.H. (with battery removed)
* Temperature Coefficient Nominal 0.15 x (specified accuracy) / oC @ (0oC --
18oC or 28oC -- 40oC),or otherwise specified
* Power Supply Standard 1.5V AAA Size Battery X 2
* Power Consumption typical 4.3mA
* Low Battery Below approx. 2.85V for Capacitance & Hz Below approx. 2.5V for other functions
* APO Timing Idle for 32 minutes
* APO Consumption typical 5 Micro Amp
* Dimensions 217(L) x 76(W) x 37(H)mm
* Weight approx 186 gms.

ACCESSORIES
Test leads set, Users Manual, Soft carrying pouch, Bkp60 banana plug K-type thermocouple, Alligator Clip set,BKB32 banana plug to type-K socket plug adaptor (for optional purchase)

4 DIGIT 1000A DC/AC TRUE RMS Digital Clamp meter with Inrush Current Measurement
Model 9999

SPECIAL FEATURES :
* Inrush Current Measuring Function for DC & AC
* Synchronous measurement of Inrush Current (100mS)for measuring
the true starting current for motors,lighting, breaker etc.
* Recessed safety designed input jacks.
* Good for PWM trouble shooting & in noisyenvironment measurement.

FEATURES :
* High Accuracy, Digital Reading
* ACA/DCA measurement upto 999.9A
* Indoor use
* Overload Protection on all ranges
* Diode & Continuity Test
* Auto Power Off
* Low Battery Indication
* Instant Continuity Buzzer
* Data Hold, Peak Hold & Max Hold Functions.
* Relative Zero Mode function.

GENERAL SPECIFICATIONS :
* Sensing : TRUE RMS
* Jaw Opening Size : 46.5 mm
* Display : 4 digits 9999 counts large LCD display
* Display Size : 27 mm x 55 mmi Crest Factor : Less than equal to 3
* Pollution Degree : 2
* Low Battery : The Battery Low is displayed when thebattery Voltage drops below the operating level.
* Over range indication : "O.L" indicated
* Measurement Rate : 2 times per second, nominal
* Operating Temperature : 0 DegreeC to 50 DegreeC,at <70% R.H.
* Storage Temperature: -20 DegreeC to 60 DegreeC,at <80% R.H.With battery removed from meter.
* Accuracy stated at ambient temperature 18 DegreeC to28 DegreeC(65 DegreeF to 82 DegreeF), <70% R.H.
* Temperature Coefficient : 10% of applicable accuracy per DegreeC(5% per DegreeF) out side the range of18 to 28 DegreeC (65 DegreeF to 82 DegreeF)
* Altitude : 2000m* Power Supply : 9V battery
* Dimension : 250(H) X 100(W) X 46(D) mm
* Weight : Approx. 425 gm (battery included)

SAFETY :
* All input are protected to EN61010-1, CAT III 600V.
* Withstand Voltage : 6000V

ACCESSORIES :
Test leads, Carrying Case, Battery installed,User's Manual & Banana plug
K-Type Thermocouple, Thermocouple Adaptor

Leakage current clampmeter
Model - km 2008a
Technical specification :
* function : measurement of ac leakage current, ac current upto 300a
* test mode : clip-on ct, integral mode.
* display mode : four digit lcd display.
* lcd dimension : 35mm x 21.5mm
* display size : 32mm x 15mm
* jaw size : 40mm
* sampling rate : about 2times/s
* range : 0.00ma ~300.0a (50/60hz)
* resolution : 0.01ma
* measuring range : 30ma/300ma, 30a/300a
* line voltage : line test under ac600v
* data storage : 60 groups, "fu"symbol flickering means storage is full
* peak hold : peak value capture and hold function, press hold button continously to show peak value during the course of testing.
* data hold : display shows "dh" symbol.
* overload : display shows "ol" symbol.
* battery voltage : when battery voltage reduced to 2.5v ~ 2.7v, battery low voltage symbol will be displayed. At this time, measurement accuracy will decrease.
* power consumption : about 5mw 0 0
* operating temperature and humidity : -0 c ~ 40 c : below 80% r.H. 0 0
* storage temperature and humidity : 10 c~60 c : below 70%rh
* insulation strength : ac 2kv/rms (between core and box)
* auto power off : 5 minutes to reduce battery consumption.
Dimension : 64(w)mm x 160(h)mm x 23(t)mm
* weight : approx. 120g (with battery)
* power :dc3v button-type battery lr-44 x 2 or sr-44 x 2.
* applicable safety rules : iec1010-1, iec1010-2-032, pollution degree 2, cat iii(600v)

3 Phase Trms Power Clamp Meter With Harmonics& Inrush Current Measurement

Model 2745

FEATURES
* Power measurement of Active power (KW),Reactive power (KVAR), Apparent Power (KVA).Power Factor (PF) for 3 f 4W, 3 f 3W,1 f 2W, 1 f 3W
* Useful for Energy Audit & Harmonics Analysis.
* Harmonic measurement(level, percentage & THD%)
* Triple display KW, V, A easy to read

Autoranging Digital Clampmeters - 400A AC
Model No. : 27-AUTO

400A ACAuto Ranging, 31/2 Digit, 2,000 Counts,Data Hold,Max, NCV, APO

AC Current 2A, 20A, 200A, 400A (Auto Ranging)
Accuracy +-(3%rdg+5dgt) on 2A+-(2%rdg+3dgt) on 20A+-(2%rdg+5dgt) on 200A & 400A
Overload 400A AC max. for 1min.
AC Voltage 2V,20V,200V, 600V (Auto Ranging)
Accuracy +-(1.2%rdg+3dgt)
DC Voltage 200mV, 2V, 20V, 200V, 600V(Auto Ranging)

Model : 2003A+
Autoranging Digital Clampmeters - 2000A DC / AC TRMS
2000A DC & 2000A AC (TRMS)

3¾ Digit, 6,000 Counts, 60 Segment Bargraph,Auto & Manual Ranging,D ZERO, Hz/Duty, RPMMIN-MAX, Data Hold, Audible Continuity, APO

Ranges* AC Current 600A, 2000AAccuracy ±(3.5%rdg + 5dgt)Overload 2000A AC max. for 1 min.* AC Voltage 6V, 60V, 600V (Auto &Manual Ranging)Accuracy ±(1%rdg + 6dgt) (50~60Hz)±(2%rdg + 4dgt) (40~500Hz)Overload 600V DC / AC rms.* DC Current 600A, 2000AAccuracy ±(2.5%rdg + 5dgt)Overload 2000A DC max. for 1 min. TRMS* DC Voltage 600mV, 6V, 60V, 600V (Auto &Manual Ranging)Accuracy ±(0.5%rdg+5dgt)