Multimeter

Approx. 58,390 / Piece Get Latest Price

Product Brochure
Fluke 27 II and 28 II:Rugged IP 67 Industrial Multimeters

The NEW Fluke 27 II and 28 II digital multimeters define a new standardfor operating in harsh conditions with the features and accuracyto troubleshoot most electrical problems. Both meters have IP 67(waterproof and dustproof) rating, MSHA approval, extended operatingtemperature range of -15 °C to +55 °C (5 °F to 131 °F, -40 °C for up to20 minutes) and 95 % humidity, and have been designed and tested towithstand a 3 m (10 ft) drop. The new Fluke 20 SeriesMultimeters are built to work in the toughest environments.

Approx. 5,825 / Piece Get Latest Price

Product Brochure
DIGITAL MULTIMETER WITH VFD FEATURE

SPECIAL FEATURES :
* VFD-V & VFD-Hz in Dual Display
* 5msCREST-MAX capture mode (Peak Hold)
* Autoranging Relative -Zero mode
* Display Hold* EF-Detection (NCV)
* Beep-Jack input warning* Hz Line Level Frequency
* Hz Logic Level Frequency* Diode Test
* Continuity Test
* Beep-Jack input warning
* Hz Line Level Frequency
* Hz Logic Level Frequency
* Diode Test
* Continuity Test

GENERAL SPECIFICATIONS :
* Sensing : Average sensing
* Display : 3-5/6 digits 6000 counts 3 digits 999 counts dual LCD display
* Update Rate : 5 per second nominal
* Polarity : Automatic
* Low Battery : Below approx 2.4V
* Operating Temperature : 0 C to 40 C
* Relative Humidity : Maximum 80% R. H. For temperature upto 31 C decreasing linearly to50% Relative Humidity at 40oC
* Altitude : Operating below 2000m
* Storage Temperature : -20 C to 60 C, < 80% R.H. (With battery removed)
* Temperature Coefficient : nominal 0.15 x (specified accuracy) / °C @ (0 C--18 C or 28 C--40 C), or otherwise specified
* Power supply : Standard 1.5V AAA Battery x 2.
* Power Consumption : 5.4mA typical
* APO Timing : Idle for 34 minutes
* APO Consumption : 10mA typical
* Dimension : 186(L) x 87(W) x 35.5(H) mm ; 198(L) x 97(W) x 55.5(H) mm with Holster.
* Weight : Approx. 340 gms; 430gm with holster.

Approx. 615 / Piece Get Latest Price

Product Brochure

3½ DIGIT 1999 COUNTS DIGITAL MULTIMETER

SPECIAL FEATURES :
* 10 A Fused?High Accuracy, Large LCD, Digital reading
* Alarm Buzzer sounds when the lead is connected to the wrong input terminals.
* Instant Continuity Buzzer.
* Battery check function

FEATURES :
* Overload protection on all function ranges
* Recessed safety designed input jacks.
* Transistor hFE Test & Battery Test
* Diode & Continuity Test

GENERAL SPECIFICATIONS :
* Sensing : Average Sensing.
* Basic Accuracy : ±(0.5%rdg 1dgt)
* Display : 3½ digit LCD display (2000 Counts)
* Digit Size : 13.5mm
* Measurement Rate : 2.5 measurements persecond, nominal.
* Polarity : Automatic, positive implied,(-) negative polarity indication.
* Over range Indication : ‘1’ or ‘-1’ displayed
* Operating Temperature :0°C to 50°C; R.H. * Storage Temperature :-20°C to 60°C; R.H. * Power : Single, Standard 9V battery
* Dimension : 151mm(L)x70mm(W)x38mm(H)
* Weight : Approx. 200g. (Including battery)

Approx. 2,755 / Piece Get Latest Price

Product Brochure
Fluke 101Digital Multimeter
The FIRST-CHOICE multimeterfor electrical professionals

Designed for basic electricaltests, the Fluke 101 digitalmultimeter offers reliablemeasurements for residential/commercial electricians andheating and air conditioningtechnicians. This small,lightweight multimeter fitscomfortably in your handbut is rugged enough towithstand daily use for yearsto come. When it comes toprofessional-grade affordablemultimeters, the Fluke 101digital multimeter is yourbest choice.

For more Details Please see attached Datasheet

Approx. 8,975 / Piece Get Latest Price

Product Brochure

SPECIAL FEATURES :
* Autocheck V & Ohm
* 24 Segments Analog Bar-graph
* EF-Detection (NCV)
* Crest Mode (Peak Hold), Data Hold function

FEATURES :
* Backlight LCD Display
* Autoranging Relative Zero Mode
* Auto-ranging MAX/MIN record
* Auto Power Off
* Low Battery Indication
* PC interface (optional)
* Diode & Continuity Test
* Wrong Input (test lead) warning detection (w. r. t. switch position)

GENERAL SPECIFICATIONS :
* Sensing : Average Sensing (Model KM 255)TRUE RMS (Model KM 257)
* Display : 3-5/6 digits 6000 counts LCD display
* Operating Temperature : 0°C to 40°C,at * Storage Temperature: -20°C to 60°C, * Update Rate : Fast Data : 5 per second nominal24 Segments Analog Bar-graph : 40/second
* Altitude Relative Humidity : Maximum relative humidity 80%for temperature upto 31oC decreasing linearly to 50%relative humidity at 40oC*Pollution Degree : 2
* Temperature Coefficient : nominal 0.15 x(specified accuracy)/°C @ (0°C~18°C or28°C~40°C), or otherwise specified.
* Low battery : Below approx. 2.3V
* Power Consumption : 3.5mA
* APO Consumption : 10A typical
* APO Timing : Idle for 34 minutes
* Power Supply : 1.5V AAA battery x 2
* Dimension : 161(L) X 80(W) X 50(H) mm
* Weight : Approx. 340 gm ( with Holster)

Approx. 5,965 / Piece Get Latest Price

Product Brochure
Fluke 15B+/17B+Digital Multimeters Fluke quality is always within your reach

The Fluke 15B+ and 17B+ digital multimeters arecompact, easy to use tools that deliver safe,reliable measurements.

The right tools for the jobYour job requires that you have a rugged, reliable andaccurate digital multimeter. The new Fluke 15B+ and17B+ offer everything you need.Product highlights- NEW - CAT III 600 V safety rating- NEW - 50 % bigger display with bright whitebacklight- NEW - Over-voltage indicator (17B+)- Frequency and temperature measurement (17B+)- Voltage, resistance, continuity, capacitance- Input terminal for ac and dc current measurements to10 A current- Diode test, data hold

Approx. 49,540 / Piece Get Latest Price

Product Brochure
80 Series VDigital Multimeters

Performance and accuracy formaximum industrial productivity

The Fluke 80 Series V have improvedmeasurement functions, troubleshootingfeatures, resolution and accuracy to solvemore problems on motor drives, in plantautomation, power distribution, and electromechanicalequipment.
The Fluke 87V has a unique function foraccurate voltage and frequency measurementson adjustable speed motor drives and otherelectrically noisy equipment. A built-inthermometer conveniently allows you to taketemperature readings without having to carrya separate instrument.

Approx. 24,750 / Piece Get Latest Price

The Fluke 170 Series includes the following models:

• Fluke 179 True RMS DMM with 80BK Temperature Probe
• Fluke 177 True RMS DMM
• Fluke 175 True RMS DMM

Approx. 21,225 / Piece Get Latest Price

Product Brochure
True Rms Digital Multimeter With Vfd Feature & Pc Interface

SPECIAL FEATURES :
* 41 Segment Analog Bar-graph* Relative Zero Mode
* PC Interface Capability* VFD-V & VFD-Hz readings
* Crest (Instantaneous Peak Hold) function
* T1-T2 differential Temperature readings.
* 500,000 counts stable DCV mode

SAFETY :
* Double insulation per IEC61010-1 2nd Ed., EN61010-1
2nd Ed., UL61010-1 2nd Ed., & CAN/CSA C22.2 No.
61010.1-0.92 to Category IV 1000V AC & DC.
* Transient Protection : 12 kV (1.2/50ms surge)
* Terminals (to COM) Measurement Category :
V/A/mAmA : CAT IV 1000V AC & DC

FEATURES :
* DC Voltage Basic Accuracy 0.02%
* AC; AC DC True RMS Conversion AC. AC DC Voltage Bandwidth upto 100kHz (V) & 10kHz (A)
* 5-4/5 Digit 500,000 counts large easy to read LCD Dual display with white Backlight
* Fast Measurements, 5/sec; Fully Auto-Ranging
* Record MAX, MIN & AVG. Readings
* MAX & MIN readings & Data Hold Function
* dBm function with 20 selectable values
* High speed Capacitance measurement
* 1000V General Input Protection
* Logic & Line Level Frequency
* Logic Level Duty Cycle Readings & Diode Tester
* Fast Audible Continuity & Diode tester* Auto Power Off

Approx. 2,225 / Piece Get Latest Price

Product Brochure
3¾ Digit 3999 Counts Digital Multimeter

SPECIAL FEATURES :
* Industrial Grade Rugged Digital Multimeter
* Sensing : Average
* Automatic Zero adjustment.
* Peak Hold facility
* Over Load Protection 500V DC or AC rms
* Auto range on Frequency range & measurement upto 2 MHz.
* Logic Test, Diode & Continuity Test & Transistor hFE Test.
* Low battery indication

GENERAL SPECIFICATIONS :
* Sensing : Average Sensing.
* Basic Accuracy : ±(0.5%rdg 1dgt)
* Display : 3¾ digit Max. 3999 Counts Large LCD display
* Display Size : 17.5 mm
* Polarity : Automatic, positive implied, (-) negative polarity indication
* Measurement Rate : 2.5 measurements / sec.
* Over range Indication : 'OL' is displayed.
* Low battery : sign is displayed when the battery voltage drops below the operating Voltage.
* Operating Temperature : 0°C to 45°C; < 70%R.H.
* Storage Temperature : -20°C to 60°C; < 80%R.H. (With Battery Removed)
* Power : Single, Standard 9V battery.
* Dimension : 170(L) x 80(W) x 40(H)mm
* Weight : Approx. 250g (including battery)

Approx. 1,360 / Piece Get Latest Price

Product Brochure
31/2 DIGIT 1999 COUNTS DIGITAL MULTIMETER

SPECIAL FEATURES :
* High Accuracy, Digital Reading
* Large LCD for easy reading
* Automatic Zero adjustment.
* Instant continuity buzzer
* OverLoad Protection on all ranges
* Recessed safety designed Input Jacks
* Diode, Continuity Test & Transistor hFE Test.
* Automatic -ve polarity indication

GENERAL SPECIFICATIONS :
* Sensing : Average Sensing.
* Basic Accuracy : +-(0.5%rdg 1dgt)* Display : 31/2 digit Max. 1999 Counts Large LCD display
* Display Size : 18 mm
* Measurement Rate : 3 measurements per second nominal
* Over range Indication : MSB (highest) digit (1) or (-1) is displayed.
* Low battery : sign is displayed when the battery voltage drops below the operating Voltage.
* Operating Temperature : 0 DegreeC to 50 DegreeC; 70%R.H.
* Storage Temperature : -20 DegreeC to 60 DegreeC; 0-80%R.H. (With Battery Removed)
* Power : Single, Standard 9V battery.
* Dimension : 170(L) x 80(W) x 40(H)mm
* Weight : Approx. 250g (including battery)

Approx. 49,020 / Piece Get Latest Price

Product Brochure
Fluke 27 II and 28 II:Rugged IP 67 Industrial Multimeters

The NEW Fluke 27 II and 28 II digital multimeters define a new standardfor operating in harsh conditions with the features and accuracyto troubleshoot most electrical problems. Both meters have IP 67(waterproof and dustproof) rating, MSHA approval, extended operatingtemperature range of -15 °C to +55 °C (5 °F to 131 °F, -40 °C for up to20 minutes) and 95 % humidity, and have been designed and tested towithstand a 3 m (10 ft) drop. The new Fluke 20 SeriesMultimeters are built to work in the toughest environments.

Approx. 1,350 / Piece Get Latest Price

Product Brochure
31/2 Digit 2,000 Count LCD 17mm LargeLCD, Audiable Continuty,Diode & hFE Test

Model Meco 603

Ranges
DC Voltage 200mV/2/20/200/1000V
Accuracy +-(0.5%rdg+1dgt) on allranges
AC Voltage 200mV/2/20/200/750V(50-500Hz)
Accuracy +-(1%rdg+4dgt) on allranges except+-(1.5%rdg+4dgt) on 750VDC Current 200mA/2mA/20mA/200mA/20A
Accuracy +-(1%rdg+1dgt) on allranges except+-(2%rdg+3dgt) on 20AAC Current 200mA/2mA/20mA/200mA/20A (50-500Hz)

Approx. 3,900 / Piece Get Latest Price

Product Brochure
Fluke 106/107Palm-sized DigitalMultimeters
Fluke 106 and 107put measurements inthe palm of your hand

The Fluke 106 and 107 arecompact, easy to use tools.These are palm-sizeddigital multimeters deliversafe, reliable measurementstime after time.The Fluke 106 and 107 are greatproducts made to fit the way youwork! These are the only Flukedigital multimeters designed to fitin the palm of your hand and gowith you no matter where yourjob takes you.

Approx. 1,200 / Piece Get Latest Price

Product Brochure
Probe Temperature Meter
Model KM 6502

Approx. 2,175 / Piece Get Latest Price

Product Brochure
3½ DIGIT LARGE DISPLAY DIGITAL MULTIMETER WITH TERMINAL BLOCKING SYSTEM

FEATURES :
* Test lead jack mechanical protection function & full Range over-load protection function
* Low power consumption CMOS double integration, A/D transform integrated circuit
* Back light display
* Auto Zero Calibration
* Auto Polarity display
* Low Battery & Over range indication.
* Selected range displayed on LCD.
* Instant continuity Buzzer.
* Recessed safety designed Input jacks
* “ DATA HOLD” switch freezes reading.

GENERAL SPECIFICATIONS :
*Sensing : Average Sensing.
*Basic Accuracy : ±(0.5%rdg 3dgts)*Display : 3½ digit 2000 counts LCD display with automatic sign and Function annunciators.
*Digit height : 28mm
*Over range indication : Highest digit of (1) or (-1) is displayed.
*Polarity : Automatic (-)negative polarity indication.
*Low battery : sign is displayed when the battery Voltage drops below the operating Voltage.
*Measurement rate : 2.5 measurements per second , nominal.
*Operating Temperature : 0°C to 50°C; <70% RH
*Storage Temperature : -20°C to 60°C; <80% RH
*Auto Power Off : The meter will shut off automatically about 15 Minutes after power is ON if the meter is not in use.
*Power : Single 9 V Battery.
*Dimension : 192 (L) x 88 (W) x 42 (H) mm
*Weight : Approx. 600gms. (including battery)

Approx. 13,475 / Piece Get Latest Price

Digital thermo hygrometer with data loggingdew point / wet bulb temperature / humidity meter

Approx. 5,000 / Piece Get Latest Price

Product Brochure
Digital Lux Meter
Model KM 8051

Approx. 1,638 / Unit Get Latest Price

Product Brochure
MC 904
500V - 500MΩ Analog Insulation Tester

Features :
l Single Person Push ButtonOperation
l High Accuracy±5%of Indicated Value in Effective Range
l Scale Length : 80mm (approx.)
l Terminal Voltage :>85% of Rated Voltage for InsulationResistance
l Measurement from 10% to 100% of the Insulation Resistance Range
l ABS Resin Yellow Case with Polycarbonate Meter Front Cover
l Meets Requirement of IEC1010, Installation Category II, 1000VPhase Earth
l Designed to Generally Confirm to IS 10656-1983
l 7 Models with various Voltage & MOhm Ranges
l Battery Adaptor (Optional) for MC-900BA Series

Approx. 6,075 / Piece Get Latest Price

Product Brochure
VOLTAGE TESTER

SPECIAL FEATURES :
* AC-Detection Shaker (KM 69)
* Bi-color LED Hazardous Live warning (at > 70VDC / 33VAC) (KM 69)
* RCD Trip test. (KM 69)
* Segment Bar Graph (KM 69)
* Indicator Self-test
* Ergronomic design for easy grip in hand
* Overload-Alert warning
* Non-Contact & Probe Contact EF-Detection.

FEATURES :
* Automatic DCV, ACV, & Continuity Selection.
* Overload Alert warning (1000V LED flashes when >1000V AC / DC
* RCD Leakage Load for 230V AC / 30mA RCD Circuit Breakers (KM 69)
* Audible Beeper Continuity & Visible LED indications
* High input impedance & Auto Hold
* Auto Power Off

Approx. 1.39 Lakh / Piece Get Latest Price

Product Brochure
CABLE FAULT PRE-LOCATOR MODEL- KM-CFPL-620/620B

“KUSAM-MECO” underground Cable Fault Pre-locator is an automatic Cable Fault Locator which adopts ARM, FPGA & Dot Matrix Color LCD display Technology. This tester combines both pulse reflecting technology (TDR) & (intelligent Bridge testing (Bridge)for measuring the exact fault location such as broken line, cross faults, earthing, (poor insulation & poor contact of the lead covered cables as well as plastic cables.(Model-KM-CFPL-620B))(Model-KM-CFPL-620B)).It is a microprocessor based fault locator with a user friendly menu. It is easy to operate. It tests almost all power cables, telecom & signal cables. It has an English menu which is easy to understand & use. With Megameter & Ohmmeter it enables to test insulation resistance & loop resistance. It has USB Port for uploading test data to computer.

FEATURES :
-- Small size, light weight and ABS plastic housing which is ergronomically designed for easy use by user.
-- Menu driven simple operation.
-- Measurement maximum 8 km in selectable ranges.
-- Tests any type of copper telecom and signal cables.
-- Range, VOP and Gain are selected automatically.
-- Color LCD Display (480 x 280 dots).
-- Automatic testing mode.
-- Pulse reflection (TDR) for open, short.
-- Intelligent bridge (Bridge) testing for open,short, or low insulation cable faults.(Model-KM-CFPL-620B)
-- With mega meter it enables to test insulation resistance and loop resistance.
-- Six function keys and simple operation.
-- Manual testing function is also available.
-- With 4 GB USB Pen drive, it is easy to upload memory data to computer.
-- Rechargeable lithium battery with intelligent charger
-- Continued 8 hours operating time on internal battery.
-- Rugged construction and easy to carry on site.

GENERAL SPECIFICATIONS :
-- Display Readout : Color LCD : 480*280·-- Continued operating time : 8 hours-- Charging time : 3 hours-- Power Supply : 7.4V Rechargeable Li-ion battery. Charging voltage 230V +/-10%, 50Hz, single phase.-- Storage Temperature : -15°C ~ + 55°C; RH <85%RH.-- Working Temperature : -15°C ~ + 55°C; RH <85%RH.-- Dimension : 212 (L) × 170 (W) × 90 (H) mm (approx.)-- Weight : 1.20 Kg Net (approx.)

Approx. 4,625 / Piece Get Latest Price

Product Brochure
The meter is a temperature and humidity measuring instrument. It is normally used to measure the humidity & temperature in Offices, Storerooms, Buildings & Greenhouses.

KM 8010

Approx. 775 / Number Get Latest Price

NON-CONTACT AC VOLTAGE TESTER

FEATURES :
* Non - contact detection of AC voltage up to 1000V
* Voltage sensitivity : 100 to 240V AC
* Differentiate live wire and neutral wire
* Frequency : 50/60 Hz* Detection : distance : <5mm
* Operation temperature : 0 -55 degree Celcious
* Storage temperature : -20 C - 60 degree Celcious
* Humidity : <85 % RH
* Power Supply : 1.5 AA X 2

Approx. 4,150 / Number Get Latest Price

Product Brochure
Waterproof pen testers
PH, Conductivity, TDS testers

Model : 6011, 6011A, 6021, 6022, 6031, 6032, 6061

Approx. 1,146 / Piece Get Latest Price

Product Brochure
Single Phase Power Meter VIPS 999 / VIPS999P

Features:
*1 Line 4 Digit ultra bright LED display
*Site Programmable CT and PT ratio (Primary and Secondary)
*True RMS measurement
*RS485 Computer Interface
*Harmonic measurement (Total & Individual)
*Auto ranging
*Universal Auxiliary supply
*Password protection
a) Optional features
b) 60A direct current (External CT module available)

Advantages:
*Cost-effective
*Accurate reading
*Long life compared to Analog, as no moving parts
*Reduce panel space, wiring and installation time
*Precise onsite display

Measuring Parameters :
*Voltage (L-L)
*Voltage (L-N)
*Current
*Active power
*Reactive power
*Apparent power
*Frequency
*Total harmonic distortion (voltage and Current)