Home » Our Products »

New Items

Digital Temperature Data Logger

REQUEST CALLBACK

Click to Zoom

Get Best Quote

Approx. Rs 16,225 / Piece Get Latest Price

Product Details:

Condition

New

CO /TEMP./RH Data Logger
Model KM 5570

Carbon dioxide meter is widely used in factory, workshop,green house,clean room, industry & agriculture, _wine bar,hotel, hospital, shop market, airport, railway station,entertaiment hall & moive theater etc.

FEATURES :
— Large LCD Display : 3.5” (8.9cm) with backlight LCD Display.
— Logger mode : Key start / stop, immediately, schedule, Real-time & Roll-over.
— Carbon Dioxide (CO2):
Range : 0 ~ 9999ppm
Accuracy : ± 50ppm / ±5% rdg (0~5000ppm)
Response time : 10s
— Temperature :
Range : 0.1 ~ 70°C (14 ~ 158°F)
Resolution : 0.1°C / °F
Accuracy : ± 0.6°C / ± 0.9°F (0 ~ 50°C / 32 ~ 122°F), others 1.2 ± °C
— Humidity :
Range : 0.1 ~ 99.9%
Resolution : 0.1%
Accuracy : ± 3% ( 10 ~ 90%)
— Logging Memory : 40,000.
— Operating Condition : 0 ~ 50°C, 0 ~ 95%RH
— Storage Condition : 20 ~ 60°C, 0 ~ 99%RH
— Power supply : Adaptor

Yes! I am Interested

Earth Leakage Tester

REQUEST CALLBACK

Click to Zoom

Get Best Quote

Approx. Rs 36,875 / Piece Get Latest Price

Product Brochure

Product Details:

Minimum Order Quantity	1 Piece
Condition	New

Digital ELCB Tester / Earth Leakage Tester
Model KM 2820EL

FEATURES

Operating voltage 100-450V L-E. Rated current 999mA, at 317V AC/50Hz. Checks ELCB trip time and trip point (sensitivity). Auto Power Off. Auto-Ranging. Phase angle selection (0 degree / 180 degree).	Indicates tripping phase angle. Impact resistant enclosure. Over temperature shut-down. Transient protection. Suitable for heavy industrial use. Fused
SAFETY
EN 61010-1, IEC 1010-1 CAT III 450V.
GENERAL SPECIFICATIONS
Trip Current Range 0-1 A at 317V (Auto-Range Programmable) Trip Current-Resolution 1mA Operating Voltage (L-E) 100-450V Phase Angle Setting 0 degree and 180 degree selectable Timer-Max 99.999s Timer Resolution 1mS	Typical Accuracy Trip-Current + / - 1% rdg + / - 1mA Trip-Time + / - 1% rdg + / - 1dgt Voltage + / - 3% rdg + / - 1dgt Operating Temperature & Humidity -10 DegreeC to + 40 DegreeC, 80% max relative humidity Power Supply 1.5V (AA) x 8 batteries Dimensions 170(L) x 120(W) x 95(D) mm Weight Approx. 800g (battery included)
ACCESSORIES
Test leads, User Manual, Carrying case, Shoulder belt, Batteries
EARTH LEAKAGE TESTS
The testers may be used to check the trip point (Test 1) of the ECLB or the trip time (Test 2). Test 1 is normally used on instantaneous ELCBs while Test 2 is normally used on inverse and fixed time-delay ELCBs.
TEST PROCEDURE
Test 1 - instantaneous ELCBs A ramp current, increasing at approximately 12 mA/s is introduced between L and E and the point at which the ELCB trips is recorded. To save time and reduce energy dissipation, the starting point of the ramp may be selected. Test 2 - inverse and fixed time delay ELCBs. A constant current is selected and injected between L-E and the tripping time is recorded.

Yes! I am Interested

Solar Power Meter

REQUEST CALLBACK

Click to Zoom

Get Best Quote

Approx. Rs 11,775 / Piece Get Latest Price

Product Brochure

Product Details:

Condition

New

Digital Solar Power Meter
KM-SPM-530

APPLICATIONS :

*	Solar radiation measurements
*	Solar power research for locating the right site of the solar panels or solar water heater
*	Physics and optical laboratories
*	Meteorology
*	Agriculture
*	Windows performance - calculate the rate of daylight penetration


FEATURES :
*	Solar power measurement with Orientation and Tilt angle
*	Easy measurement for rate of daylight penetration
*	Auto change for measuring range
*	Auto power off with disable function
*	Instantaneous display Avg/Min/Max values
*	20 points memory
*	Socket of tripod mounting
*	Magnetic mount
*	Backlit LCD and 4 digits triple display


GENERAL SPECIFICATIONS :
*	Display : Back-lighted LCD & 4 digits triple display.
*	Sensor : High sensitive silicon photodiode
*	Measuring Range : 0 ~ 2000W/m2 (0 ~ 634 BTU (ft2 * h) .
*	Spectral Response : 400~1100nm
*	Operating Temperature : 0~50°C (32~122°F)
*	Relative Humidity : Maximum 85%R.H. at 60°C decreasing linearly to 80% R.H. at 50°C
*	Storage Temperature : --10~60°C (14~140°F)
*	Power Supply : 9V Battery
*	Angular Accuracy : Cosine calibration < 5% (angle < 60°)
*	Low Battery Indication.
*	Accuracy : at 25°C 60%RH
*	Dimension : 140 x 49 x 29mm For Main Instrument & 83 x 54 x 26mm For Sensor Probe.
*	Weight : approx 210 g without battery.

*	ACCESSORIES : Users Manual, 9V Battery, Carrying case.

Yes! I am Interested

Digital Hot Wire Thermal Anemometer

REQUEST CALLBACK

Click to Zoom

Get Best Quote

Approx. Rs 10,300 / Piece Get Latest Price

Product Brochure

Product Details:

Condition

New

HOT WIRE ANEMOMETER
Model KM 734

Anemometer is mainly used in Electric Power,Iron and Steel, Petrochemicals, Energy andother Industries.

GENERAL SPECIFICATIONS :
* Operating Voltage : 9V* Dimension : 198 x 85 x 45mm* Weight : Approx. 390g* Accessories : Battery, User Manual & Carrying Case.

Yes! I am Interested

Phase Sequence Meter

REQUEST CALLBACK

Click to Zoom

Get Best Quote

Approx. Rs 4,625 / Piece Get Latest Price

Product Brochure

Product Details:

Minimum Order Quantity	1 Piece
Condition	New

PHASE SEQUENCE METER
KM 855 PR PHASE SEQUENCE METER

When connecting any 3 phase equipment to the 3 phase power, the first step is to check the phase sequence of the 3 phase power supply. This instrument is a handy and essential instrument for checking the phase sequence in 3 phase Circuits. When connecting motors, energy meters, watt meters, Power factor meters, Power factor controllers, Power meters etc, it is very important to connect the equipments in proper phase sequence, otherwise the instrument / equipment can be damaged or give incorrect readings. The instrument can also be used to check for open phase( one phase only).

FEATURES

Description : It is used to measure the Phase sequence (R,Y,B) & Open phase Condition through
LED and Buzzer.
Operational Voltage : 60 ~ 600V (3 phase AC) (KM-981-MK-1); 200V ~ 600V AC (KM 855 PR)
Dielectric Strength : 2000V / minute (impulse Voltage 4000V) (Model KM-981-MK-1)
Measuring frequency range : 20Hz ~ 400Hz (KM-981-MK-1); 50Hz ~ 60Hz (KM 855 PR)
Time limit for continuous measurement : 60 min. at 200V AC, 4 min. at 600V AC(KM-981-MK-1)
Cord : 1.1m each of Red (R), White (S) & Black (T) cord.( KM 855 PR)
Storage Temperature : -20 DegreeC ~ 60 DegreeC at 90% Max. R.H.( KM 855 PR)
Operating Temperature : -10 DegreeC ~ 40 DegreeC at 80% Max. R.H.( KM 855 PR)
Dimension : 85 x 64 x 23mm (excluding the measuring lead) (KM-981-MK-1)
134(L) x 85(W) x 45(D)mm ( KM 855 PR)
Weight : Approx. 200g. (KM-981-MK-1) Approx. 530g. ( KM 855 PR)
Safety : EN61010-1 EN61010-2-31 CAT III 600V. (KM 855 PR)

ACCESSORIES :

Model - KM 981MK- Test leads with Pin Terminal & separate Insulated Crocodile clips
Model - KM 855 PR- Test leads with Insulated Crocodile clips, Instruction manual & carrying case.

Yes! I am Interested

Conductivity Tester

REQUEST CALLBACK

Click to Zoom

Get Best Quote

Approx. Rs 4,150 / Number Get Latest Price

Product Details:

Minimum Order Quantity	1 Number
Brand	Kusam-Meco
Usage	Laboratory, Industrial

Waterproof pen testers
Ph, conductivity, tds testers
Model : 6011, 6011a, 6021, 6022, 6031, 6032, 6061

Yes! I am Interested

Phase Sequence Meter

REQUEST CALLBACK

Click to Zoom

Get Best Quote

Approx. Rs 1,600 / Piece Get Latest Price

Product Brochure

Product Details:

Condition

New

PHASE SEQUENCE METER
MODEL - Model KM 981- MK-1

When connecting any 3 phase equipment to the 3 phase power, the first step is to check the phase sequence of the 3 phase power supply. This instrument is a handy and essential instrument for checking the phase sequence in 3 phase Circuits. When connecting motors, energy meters, watt meters, Power factor meters, Power factor controllers, Power meters etc, it is very important to connect the equipments in proper phase sequence, otherwise the instrument / equipment can be damaged or give incorrect readings. The instrument can also be used to check for open phase( one phase only).

FEATURES

Description : It is used to measure the Phase sequence (R,Y,B) & Open phase Condition through
LED and Buzzer.
Operational Voltage : 60 ~ 600V (3 phase AC) (KM-981-MK-1); 200V ~ 600V AC (KM 855 PR)
Dielectric Strength : 2000V / minute (impulse Voltage 4000V) (Model KM-981-MK-1)
Measuring frequency range : 20Hz ~ 400Hz (KM-981-MK-1); 50Hz ~ 60Hz (KM 855 PR)
Time limit for continuous measurement : 60 min. at 200V AC, 4 min. at 600V AC(KM-981-MK-1)
Cord : 1.1m each of Red (R), White (S) & Black (T) cord.( KM 855 PR)
Storage Temperature : -20 DegreeC ~ 60 DegreeC at 90% Max. R.H.( KM 855 PR)
Operating Temperature : -10 DegreeC ~ 40 DegreeC at 80% Max. R.H.( KM 855 PR)
Dimension : 85 x 64 x 23mm (excluding the measuring lead) (KM-981-MK-1)
134(L) x 85(W) x 45(D)mm ( KM 855 PR)
Weight : Approx. 200g. (KM-981-MK-1) Approx. 530g. ( KM 855 PR)
Safety : EN61010-1 EN61010-2-31 CAT III 600V. (KM 855 PR)

ACCESSORIES :

Model - KM 981MK- Test leads with Pin Terminal & separate Insulated Crocodile clips
Model - KM 855 PR- Test leads with Insulated Crocodile clips, Instruction manual & carrying case.

Yes! I am Interested

Phase Sequence Indicator

REQUEST CALLBACK

Click to Zoom

Get Best Quote

Approx. Rs 5,075 / Piece Get Latest Price

Product Brochure

Product Details:

Condition

New

Model KM 888PMR

FEATURES Indicates Phase Presence? Indicates Phase Rotaton Indicates Motor Rotation / wiring? Indicates Battery Status? Phase Rotation & Motor RotationIndication works from as low as 1 Vac.? Small and rugged enclosure? Color coded test Leads.? Phase Presence Indication from as low as 100Vac.? Very low consumption.? Fused? Lightweight, Robust & Compact.? Works from 2Hz to 400Hz sine.

Yes! I am Interested

Looking for New Items ?