Measuring Instruments

Approx. Rs 13,800 / Piece Get Latest Price

Product Brochure
Digital Earth Resistance Tester(3 Terminal)
Model - KM 1520A

FEATURES :
* Earth Resistance Measuring range : 0-40 / 400 / 4000 Ohm
* Measure Earth Voltage (VAC) : 0-400V
* 2mA measuring current permits earth resistance to test without tripping
* earth leakage current circuit breakers in the circuit.
* Capable of measuring earth voltage(Vac).
* Auto power off function. The timer operates automatically about three to five minutes after
the"PUSH BUTTON SWITCH" and "Timer ON BUTTON" are pressed together This will keep
the test "ON" for about three to five Minutes. Then auto power off.
* Battery operated.
* Operating Temperature & Humidity : 0 ~ 40 DegreeC; 80% RH Max.
* Storage Temperature & Humidity : -10 DegreeC ~ 60 DegreeC; 80% RH Max.
* Data Hold function.
* Small and light weight
* EN61010-1 CAT IV 400V.
* Display Back-light
* External probe* CE-Mark approval

GENERAL SPECIFICATIONS :
* Measurement Ranges : Earth Resistance : 0-40W / 0-400W / 0-4000W
Earth Voltage : 0-400V AC (40-500Hz)
* Accuracy : Earth Resistance : +-(2%rdg 3dgts)
Earth Voltage : +-(2%rdg 3dgts)
* Earth Resistance Resolution : 0-40W (0.01W); 0-400W (0.1W); 0-4000W (1W)
* Display : 33/4 Digit 4000 counts LCD Back-light display.
* Measurement System : Earth resistance by constant current inverter 820Hzapprox. 2mA
* Low Battery Indication : "B" symbol appears on the display
* Data Hold Indication : "DH" symbol appears on the display
* Over Range Indication : "1" (MSD)
* Open Circuit Indication : LED will be unlit
* Power Supply : 1.5 V X 6.Type AA batteries.
* Dimensions : 163(L) X 102(W) X 50(D)mm
* Weight : 480g approx.(battery included)

Approx. Rs 2.52 Lakh / Piece Get Latest Price

Product Brochure
Fluke 1555 and 1550C InsulationResistance Testers

Features include:
• Select test voltages up to 5 kV (1550C) and 10 kV (1555) andsave time by trending on the spot using Fluke Connect*
• CAT III 1000 V, CAT IV 600 V safety rating
• Selectable test voltages in 50 V steps from 250 V to 1000 V, and100 V steps above 1000 V
• Reduce paperwork while creating an auditable data trail bywirelessly storing results in Fluke Connect*
• Long battery life gives the user over 750 tests between charges
• Guard system eliminates the effect of surface leakage current onhigh-resistance measurements
• Historical tracking and trending of assets identifies degradationover time, allows real-time decisions to be made in the fieldwith Fluke Connect Assets (sold separately)*
• Large digital/analog LCD for easy viewing
• Capacitance and leakage current measurement
• Ramp function for breakdown testing
• Resistance measurements up to 1TΩ/2TΩ
• Timer settings up to 99 minutes for timed tests
• 3-year warranty

Approx. Rs 2,745 / Piece Get Latest Price

Product Brochure
Humidity & Temperature Meter
Model No. 920P 

Humidity Measuring
Functions - °C / °F / RH Selection, MAX / MIN,Auto Power Off
Range - 0% ~ 100% RH
Resolution - 0.01%RH

Temperature Measuring
Range - - 20°C ~ 80°C / - 4°F ~ 176°F
Weight - 139gms Including Battery (approx.)

Approx. Rs 6,250 / Piece Get Latest Price

Product Brochure

ERT-1502

 

0 - 20 / 200 / 2000 Ohms, 4 Terminal with Testing Kit and Cables in hard carrying case

Description

• * Data Hold facility
• * Displays test result and battery voltage on the same screen
• * LOCK Button for continuous HANDS FREE measurement
• * Both Earth Resistance and Earth Resistivity can be measured
• * Can be used in 4 Terminal and 3 Terminal configurations
• * Display : 4 Digits EXTRA LARGE Backlit Dual LCD Display
• * Earth Resistance Range : 0 - 20/200/2000 Ohms
•   Accuracy : ±2%
• * Low Resistance Range : 0 - 200 k.Ohms
•   Accuracy : ±2%
• * DC Voltage : 0 - 1000V
•   Accuracy : ±0.8%
• * AC Voltage : 0 - 750V
•   Accuracy : ±1.2%
• * Complies with CE, CAT-III 1000V
• * Complete with Testing Kit

Approx. Rs 3,300 / Number Get Latest Price

Product Brochure
WACO DIGITAL EARTH RESISTANCE TESTER

Digital Earth Tester

Application :WACO Digital Earth Resistance Tester is designed to measure the resistance if earth used in power circuit, Telecommunications, Railway Electrification, Domestic and Industrial electrical installations. The tester measures directly the resistance of the earth and also measure the ground resistivity. The study, elegant and compact body makes the instrument portable, easy to use, Hand-held instrument.

Approx. Rs 1,539 / Piece Get Latest Price

Product Brochure
DIT 99E
1000V - 2000MΩ Digital Insulation Tester

Features :
l 3½ Digit 17mm LCD Display
l High Accuracy ± (3% rdg + 2 dgt)
l Single Person Push ButtonOperation
l Designed to Generally Confirm to IS 10656-1983
l Meets Requirement of IEC1010, Installation Category II,1000V Phase - Earth
l Terminal Voltage more than 85% of rated Voltage forInsulation ResistanceMeasurement from 10% to 100% ofthe Insulation Resistance Range
l 5 Models with various Voltage &MOhm Ranges
l Carrying Case

Approx. Rs 12,618.00 / Piece Get Latest Price

Product Brochure
DIT 954
5kV - 200G Digital Insulation Testerwith AC Voltage, Phase Sequence & Phase Status Indicator

Introduction : 
MECO - DIT 954 is a 5KV Digital Insulation Tester with 3½ Digit (1999 Counts) Large Display and Backlight. It measures Insulation Resistance upto 200GV, AC Voltage upto 600VAC and checks Phase Sequence and Phase Status Indication.

Features :3½ Digit (1999 Counts) Large LCD DisplayHigh Accuracy ±(3%rdg+5 digit) for Insulation Measurement±(2% +5 digit) for AC Voltage MeasurementRange Selection & Single Person Push Button OperationLCD with Green Back Light Function with Indicator SwitchData Holding Function, Function Icons on DisplayMeasurement of AC Voltage upto 600VAC

Approx. Rs 10,500 / Piece Get Latest Price

5 KV - 10,000 MOHMS, Analogue Display, Metal Body, Hand Driven, Insulation Tester

Range : 5000 Volts - 10,000 Mohms

Hand drive Insulation Tester is used for measuring insulation resistances of various electrical machinery, Control Panels, Switching Equipment, Insulators Cables, Wiring and various other devices ranging from Small Electrical Units to Large size Transformers. The instrument conforms fo Is: 2992:1980.

Approx. Rs 4,700 / Piece Get Latest Price

Product Brochure
3¾ DIGIT Digital Insulation Resistance Tester With Multimeter Functions
KM 370 : 500/1000/2500V
KM 379 : 250/500/1000V

SPECIAL FEATURES :
* Digital MW Hitester & Digital multimeter.
* Overlod Protection
* The meter can display actual insulation test voltage.
* LED light is used to indicate high voltage output status
* Measures Insulation Resistance & AC & DC Voltage
* Backlight , function characters indication
* Auto power off* Low battery indication

GENERAL SPECIFICATIONS :
* Basic Accuracy : ±(0.5%rdg 5dgts)
* Display : 3¾ digit Max. 3999 Counts liquid crystal display
* Sampling Rate : 2 times per secondí Short Circuit : 1.5mA
* Measurement time : ½/10min
* Auto range : “OL” will be displayed for overload
* Operating Temperature : 0°C-40°C, < 75%R.H.
* Storage Temperature : -10°C-60°C, < 80%R.H.
* Maximum Power Consumption : 4.5W
* Minimum Power Consumption : 18mW
* Power : AA 1.5V battery x 6
* Dimension : 170(L) x 156(W) x 64(H)mm
* Weight : Approx. 650g. Including battery.

Approx. Rs 52,700 / Number Get Latest Price

Product Brochure
Battery Capacity (Impedence) Tester for Batteries upto 500Ah

Model : 6363

Features :
* Memory & Read Function
* Right Device to know the TRUE-LIFEof Battery
* Capacity (Resistance / Voltage) Simultaneously
* On-line Testing without shutting down battery
* Built-in Comparator Function
* Rates Conditions as PASS, WARNING or FAIL
* Datalogging Memory Function
* Compact and Lightweight
* RS-232 Interface & Software
* Auto Power Off

Approx. Rs 1,284 / Number Get Latest Price

Product Brochure
Model No. BM 63

A battery is an electrochemical cell that is charged externally to store electrical power. The stored power of the battery is released when it is needed for various applications that could be required for normal day to day working, back-up operations, critical applications or for emergencies. The use of batteries is increasing every day in order to drive / support various applications such as Cars, Motor Cycles, UPS, Generators, Automobiles, Emergency Lights, Solar Power etc.

A battery is expected to always perform flawlessly as per its capacity. However sometimes even new batteries fail and hence periodic testing and maintenance of batteries is required. It is important to also test incoming batteries as a part of the quality control procedure to ensure proper compliance of the supply made by the battery manufacturer. The loss of battery capacity occurs gradually often without the knowledge of the user.

The function of the Battery Meters MECO ABM18 and BM63 is to check the capacity condition of various lead acid storage batteries and to ensure that the supported equipment is adequately backed-up, prevented from unexpected failures and forewarned for any calamity. The battery tester helps to identify the weak batteries so that they can be re-charged or weeded out of the system before they make the complete system unreliable.

Approx. Rs 1.38 Lakh / Number Get Latest Price

Product Brochure
MULTIFUNCTION POWER &HARMONICS ANALYZER MODEL - KM 2200

FEATURES
- Safety CAT III 1000V / CAT IV 600V
- Easy operation to capture the power quality problem.
- 8G Memory Card to Make the long-term measuring data storage.
- Support USB port to connect to PC and analyze the data / screen shots copied by U-disk.
- Support LAN port to make the remote control available, transfer the measuring data.
- Volts / Amps. / Hertz, Dips & Swell, Power / Energy, Unbalance, Monitor, Scope, Harmonic &Interruption functions.

ACCESSORIES - Voltage Test Lead 2 meters long x 5, Alligator Clips x 5, External DC Adaptor,
Software CD & User Manual.NEW

OPTIONAL ACCESSORIES - CT Clamps 5A / 50A / 100A / 1000A / 3000A / 5000A.

Approx. Rs 97,658 / Piece Get Latest Price

Product Brochure
Models : 9009

Features :

• I-V Curve Test for Solar Panel / Module / Cell
• Max. Solar Cell/Module Power / Cell Power(Pmax) search by Auto-Scan
• Capability: 60V, 12A
• Best Resolution: 1mV , 1mA
• Manual Single Point I-V Test
• Max. Voltage (Vmaxp) at Pmax
• Max. Current (Imaxp) at Pmax
• Voltage at Open Circuit (Vopen)
• Current at Short Circuit (Ishort)
• I-V Curve with Cursor to Display each Data Point
• Efficiency (%) Calculation of Solar Panel
• Real Time data logging
• RS232C (to USB Bridge) Cable for PC
• Communicate with PC via USB Cable
• AC Adaptor and Rechargable Lithium Battery
• Memory Size : 100 Records
• Sampling Time of Data logging : 0 ~ 99 min
• Large LCD with Backlight

Approx. Rs 2,158 / Number Get Latest Price

Product Brochure
Models : 920 - Thermo Hygrometer
Features :

Functions : HOLD / MAX / MIN / MAX - MIN / AVG / APO

Range : -20°C ~ 60°C, -4°F ~ 140°F

Accuracy : Refer Catalogue

Resolution : 0.1°C / °F

Power : 1.5 V AAA x 2 Batteries

Dimension : 25 x 51 x 133 mm (approx)

Weight : 112 gms Including Battery (approx)

Accessories : 1.5V AAA Battery (installed) x 2, Wristlet x 1, Protection Cap x 1

Approx. Rs 82,343.00 / Piece Get Latest Price

Product Brochure
Micro - Ohmmeter (7272) / Milli - Ohmmeter (7002)

Features :
* Basic Accuracy 0.25%
* Max. Test Current : 10A (60mV) for 7272, 5A (120mV) for 7002
* Manual or Auto Range
* Four Terminal Kelvin Measurement
* 6 Ranges with 1mVBest Resolution
* Measurement of Resistive and Inductive Materials
* Setting for HI, LO & PASS Readings
* Memory of 3000 Measurements Data
* Programmable HI-LO Alarm with memory of 20 Data
* Large LCD with Backlight & HOLD Function
* Low Power Consumption
* Battery Operated (Rechargeable Battery)
* Low Battery indication
* LED indication for Invalid Resistance Measurement
* Cable Length Measurement in feet &meters
* User Interface Software for PC Communication via RS232C(to USB Bridge) Cable
* Built-in Battery Charging Circuit & Calendar Clock

Approx. Rs 53,154 / Piece Get Latest Price

Product Brochure
Models : 9810
Features :

• Frequency Range 10 MHz to 8.0 GHz
• Triaxial Isotropic Measurement of EMF
• Non-Directional (Isotropic) Measurement with Three - Channel Measurement Sensor
• High Dynamic Range
• Configurable Alarm Threshold and Memory Function
• Easy & Safety to Use

Electrical Specification

• Sensor Type : Electric Field (E)
• Frequency Range : 10MHz to 8GHz
• Measurement Range : 20mV / m to 108.0 V / m,
  53 µA / m to 286.4mA / m,
  1 µW / m² to 30.93W / m²,
  0 µW / m² to 3.093mW / cm²
• Isotropy Deviation : ±10.dB (50MHz to 1.9 GHz)
  ±2.4dB (1.9GHz to 1.3 GHz)
• Overload limit : 0.42 mW / cm² (40 V / m)
• Temperature Response : ±0.5dB

Applications

• High Frequency (RF) Electromagnetic Wave Field Strength Measurement
• Mobile Phone Base Station Antenna Radiation Power Density Measurement
• Wireless Communication Application (CW, TDMA, GSM, DECT)
• Wireless LAN (Wi-Fi) Detection, Installation
• RF Power Measurement for Transmitters
• Spy Camera, Wireless Bug Finder
• Cellular / Cordless Phone Radiation Safety Level
• Microwave Oven Leakage Detection
• Personal Living Environment EMF Safety

General Specification

• Display Resolution : 0.1 mV / m, 0.1 µA / m, 0.1 µW / m², 0.001 µW / cm²
• Display Type : LCD 4 digit
• Dimensions : 67 x 60 x 247 mm (approx.)
• Weight(Including Battery) : 260 gms (approx.)
• Accessories: 9V Battery x 1, Carrying Case x 1, Instruction Manual x 1

Approx. Rs 1.4 Lakh / Piece Get Latest Price

Product Brochure
Fluke 1630-2 FCEarth Ground Clamp

Stakeless earth ground loop and ac leakage currentclamp for fast, safe indoor/outdoor earth groundresistance and ac leakage current tests.

Test the grounding components of equipment in hard-to-reachspaces, including areas that are indoors or fully paved and do notpermit driving auxiliary test stakes. Stay on line—identify groundloop resistance without the need to disconnect then reconnect the earth electrode from the system.

The Fluke 1630-2 FC Stakeless Earth Ground Clamp is the kind ofhigh-quality, rugged tool you expect from Fluke. Heavy-duty clampjaw stays in alignment and in calibration even in every day,on-the-job industrial environments.

Approx. Rs 900 / Piece Get Latest Price

Process Indicator
Model : PI 38

Features :
* Universal Input - 0-10 VDC, 0-20mA DC, 4-20mA DC
* Input Filter - 0.1 sec to 10.0 sec
* Resolution - 0.1, 0.01, 0.001, 0001
* Display : 4 Digit, 7 segment, 0.8" Red Led
* Size : 48(H) x 96(w) x 26(D) mm
* Supply Voltage : 100 to 270V AC,50-60Hz

Approx. Rs 930 / Number Get Latest Price

Product Brochure
Model No. ABM 18

A battery is an electrochemical cell that is charged externally to store electrical power. The stored power of the battery is released when it is needed for various applications that could be required for normal day to day working, back-up operations, critical applications or for emergencies. The use of batteries is increasing every day in order to drive / support various applications such as Cars, Motor Cycles, UPS, Generators, Automobiles, Emergency Lights, Solar Power etc. 

A battery is expected to always perform flawlessly as per its capacity. However sometimes even new batteries fail and hence periodic testing and maintenance of batteries is required. It is important to also test incoming batteries as a part of the quality control procedure to ensure proper compliance of the supply made by the battery manufacturer. The loss of battery capacity occurs gradually often without the knowledge of the user. 

The function of the Battery Meters MECO ABM18 and BM63 is to check the capacity condition of various lead acid storage batteries and to ensure that the supported equipment is adequately backed-up, prevented from unexpected failures and forewarned for any calamity. The battery tester helps to identify the weak batteries so that they can be re-charged or weeded out of the system before they make the complete system unreliable.

Approx. Rs 1.39 Lakh / Number Get Latest Price

Product Brochure
Model No. TTR 8100

Transformer is a very important Element in the ElectricPower Distribution System. It needs to be maintained from time to time to Guarantee Smooth Power Supply atConsumer end.MECO TTR8100 is Portable instrument for accurate measurement of 1-Phase & 3-Phase Transformer/VT/CTTurns Ratio, Excitation Voltage, Current, Phase Angle andDeviation. TTR8100 ensure the Correct Turn Ratio &Quality of the Transformer.It Checks live Test Points, Short Circuit, Open Circuit and Reverse Polarity before each measurement.